Advanced (Recording pictures)
- 124 -
For details on [REC] Mode menu settings, refer to
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates for the jitter, enabling jitter-free images to be taken.
Applicable modes:
Note
• The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In Digital Zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene Mode and to [OFF] in
[STARRY SKY] in Scene Mode.
• The setting is fixed to [MODE1] when recording motion pictures or using [HANDHELD NIGHT
SHOT] in Scene Mode.
• Only [OFF] or [MODE1] can be set in Burst Mode.
For details on [REC] Mode menu settings, refer to
Audio can be recorded simultaneously with the image. You can record the conversation
during the shooting or the situation as a memo.
Applicable modes:
• If you touch [CANCEL] during audio recording, the audio recording is cancelled.
Note
• Audio is recorded from the built-in microphone on the camera.
• Audio recorded with this unit may not play back on other equipment.
• Sound from motion pictures or pictures with audio recorded by this camera cannot be played
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
• [AUDIO REC.] cannot be set in the following cases.
– When recording with Auto Bracket
– During Burst shooting
– [PANORAMA ASSIST], [FLASH BURST] and [STARRY SKY] in Scene Mode
[STABILIZER]
[OFF]
[AUTO]
:
The optimum jitter compensation is selected depending on the condition.
[MODE1]
:
Jitter is always compensated during [REC] Mode.
[MODE2]
:
Jitter is compensated for when the shutter button is pressed.
[AUDIO REC.]
[OFF]
:
Audio will not be recorded.
[ON]
:
[
B
] is displayed on the screen.
Audio will be recorded as soon as the image is recorded.
(It will stop in 5 seconds)
