- 117 -
Advanced (Recording pictures)
Note
• The camera is focusing on all the AF areas when multiple AF areas (max. 11 areas) light at the
same time in [
]. If you want to determine the focus position to take pictures, switch the AF
Mode to [
ƒ
], [
Ø
] or [
Ù
].
• If the AF Mode is set to [
], the AF area is not displayed until the picture is brought into focus.
• Switch the AF Mode to [
ƒ
] or [
Ø
] if it is difficult to focus using [
Ù
].
• The camera may detect subjects other than a person as a face. In this case, switch the AF
Mode to any modes other than [
š
] and then take a picture.
• It will be fixed to [
š
] when the [FACE RECOG.] is set to [ON].
• It is not possible to set [
š
] in the following cases.
– In [PANORAMA ASSIST], [NIGHT SCENERY], [HANDHELD NIGHT SHOT], [FOOD],
[STARRY SKY], [FIREWORKS], and [AERIAL PHOTO] in Scene Mode.
• It will be set to [
Ø
] when a recording is performed with the Touch Shutter function
.
∫
About [
š
] (Face Detection)
The following AF area frames are displayed when the camera
detects the faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green
when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
• Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [
].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When there is rapid movement
– When the subject is other than a human being
– When the camera is shaking
– When Digital Zoom is used
