283
SQW0547
Playing Back and Editing Pictures
Using the [Playback] menu
[Location Logging]
After you send location information (latitude and longitude) obtained by your smartphone/
tablet to this unit, you can write this information on pictures using the unit.
Preparation
Send location information to this unit from your smartphone/tablet.
(→
•You must install “Panasonic Image App” on your smartphone/tablet.
1
Set the menu
→
[Playback
] → [
Location Logging
] → [
Add Location Data]
2
Use to select a period for writing location information, and press
[MENU/SET]
•[
] is displayed for pictures that have location information written to it.
■
Abort writing location information
Press [MENU/SET] while location information is being written
•[ ] is displayed for the period of the abort operation.
If selected again while [ ] is displayed, writing location information will resume where it left off.
■
Delete received location information
Use to select [Delete Location Data] and press [MENU/SET]
Use to select a period for deleting location information, and press [MENU/SET]
●
The location information cannot be written in the following cases:
•Pictures that were recorded after you sent the location information
(→
•Pictures that already have location information
•Motion pictures recorded in [AVCHD] format
•Protected pictures
•If there is not enough free space on your card
•Card switch is in “LOCK” position.
•Pictures recorded using cameras other than this unit
Writing the location information using a smartphone/tablet
When you use your smartphone/tablet as a remote controller for this unit, you can write
the location information on pictures using the smartphone/tablet.