241
SQW0547
Stabilizer, Zoom and Flash
Taking pictures with flash
Recording mode:
With the flash you can take pictures in dark places or adjust the entire contrast of a
picture by illuminating a subject with a bright background.
■
ZS100
Open/Close the built-in flash
To open the flash
Slide the flash open lever.
•
Be careful when opening the flash as the flash
will jump out.
To close the flash
Press the flash until it clicks.
•
Be careful not to catch a finger or any other
part of your body or any object when you close
the flash.
•Forcibly closing the flash can damage the camera.
•Be sure to close the built-in flash when not in use.
•The flash setting is fixed to [ ] while the flash is
closed.
■
ZS60
Use / Do not use flash
You can record with flash as appropriate to the recording mode.
Setting the way the flash works
If you do not wish to use flash,
press the [ ] button ( ) and select [ ] (Forced Flash Off).
●
The flash is fixed to [ ] (Forced Flash Off) in the following cases:
•During motion picture recording
•When recording 4K photos
•When recording using [Post Focus]
•When using the electronic shutter
•When [HDR] is set to [ON]
•When [Silent Mode] is set to [ON]
•When a picture effect in [Filter Effect] of [Filter Settings] is set