Advanced (Recording pictures)
- 74 -
[REC] Mode:
Taking Pictures with the Self-timer
Note
• When using a tripod etc., setting the Self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
• When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-timer indicator will blink and then may turn on brightly
operating as an AF Assist Lamp
to allow the camera to focus on the subject.
• We recommend using a tripod when recording with the Self-timer.
• The number of pictures which can be taken in [BURST] is fixed to 3.
• The number of pictures which can be taken in [FLASH BURST]
in Scene Mode is fixed
to 5.
• Self-timer cannot be set to 10 seconds in [SELF PORTRAIT] in Scene Mode.
• Setting of the Self-timer cannot be performed in the following conditions.
– In [HI-SPEED BURST] in Scene Mode
– When recording motion pictures
Press
2
[
ë
].
Press
3
/
4
to select a mode.
• You can also press
2
[
ë
] to select.
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
• The Self-timer indicator
A
blinks and the shutter is
activated after 10 seconds (or 2 seconds).
• If you press [MENU/SET] while the Self-timer is set,
the Self-timer setting is canceled.
