Basic
- 60 -
∫
Switching the displayed image while maintaining the Playback Zoom
Rotating the rear dial to select the picture during Playback Zoom.
• You can switch the displayed image while maintaining the same zoom magnification and zoom
position for the Playback Zoom.
Note
• You can also delete the recording information etc. on the screen during Playback Zoom by
pressing [DISPLAY].
• If you want to save the enlarged picture, use the Cropping function.
• The Playback Zoom may not operate if pictures have been recorded with other equipment.
• The zoom magnification and the zoom position are canceled when the camera is turned off
(including Sleep Mode).
• The zoom position returns to the center in the following images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
• Playback Zoom is not available during Motion Picture Playback.
Using the Playback Zoom
Rotate the zoom lever towards [
Z
] (T).
1
k
>
2
k
>
4
k
>
8
k
>
16
k
• When you rotate the zoom lever towards [
L
] (W) after
enlarging the picture, the magnification becomes lower.
• When you change the magnification, the zoom position
indication
A
appears for about 1 second, and the position of
the enlarged section can be moved by pressing
3
/
4
/
2
/
1
.
• The more a picture is enlarged, the more its quality
deteriorates.
• When you move the position to be displayed, the zoom
position indication appears for about 1 second.
A
