Panasonic LUMIX DMC-GM1KP, Руководство по обслуживанию, Страница: 32 / 60

32
7.2. About Tilt Sensor Display
The unit has the tilt sensor display function using G (3-axis accelerometer) sensor inside the unit.
[Principal of Operation]
1. Movement of “Weight” is detected by capacitance. -------- [A]
2. Each acceleration of the X/Y/Z axis is converted into data and they are output.
3. The VENUS ENGINE converts the data into a horizontal angle and an angle of inclination, and displays them to screen.
[Purpose of the adjustment]
• Correct the camera as the horizontal angle and an angle of inclination become within ±1 degree for a live-view picture.
1. When the Front-Mount unit, Main P.C.B. (include IC6003: Flash-ROM or IC2701: G Sensor) is replaced,
readjustment is necessary.
2. When the Front-Mount unit, Main P.C.B. or the exterior of the camera is replaced, please confirm following;
a. Switch to display the Guidelines in LCD.
b. Confirm that the vertical lines in LCD are parallel with string hanging down perpendicularly.
If they are significantly shifted, readjustment is necessary.
• Refer to the adjustment software for procedure of adjustment.
No special fixture is required. The adjustment can be performed with a table as possible horizontal, the string which hanging
down perpendicularly and a general-purpose tripod.