13. Others
400
• Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
• If there are two or more USB terminal on a single PC, try connecting the USB connection cable
to another USB terminal.
• Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
• A message prompting to format the card may be displayed when connecting, but do not format.
• If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
• Pictures cannot be printed using a printer that does not support PictBridge.
>
Set to [PictBridge(PTP)] in [USB Mode].
• When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
• When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
• Since aspect ratio of a panorama picture differs from normal pictures, it may not always be
possible to print it correctly.
>
Please use a printer that supports panorama pictures.
(For details, please see the operating instructions of your printer.)
>
We recommend using the “PHOTOfunSTUDIO” software on the DVD (supplied) to adjust
the size of the still picture to the print paper size.
• Depending on the lens you attach, it may move inside and create a sound. This is not a
malfunction.
• This is the noise of the Dust Reduction Function working
; it is not a malfunction.
The card is not recognized by the PC.
The card is not recognized by the PC.
(SDXC memory card is used.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
When I shake the camera, I hear a rattling sound from the attached lens.
The camera makes a noise when this unit is turned on.