319
11. Using the Wi-Fi function
1
2
Select [Via Network], and connect.
3
Select a web service.
4
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
5
Select [Single Select] or [Multi Select].
Select and send the images ([Send Images Stored in the Camera])
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[New Connection]
>
[Send Images Stored in the Camera]
>
[Web service]
[Single Select] setting
1
Select the picture.
2
Select [Set].
[Multi Select] setting
1
Select the picture. (repeat)
• The setting is canceled when the picture is selected
again.
2
Select [OK].
• The number of pictures that can be sent by [Multi
Select] is limited.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
• To change the send settings on a screen that is displayed after the image has been sent,
press [DISP.]. To terminate the connection, select [Exit].
MENU
6HW
2.