11. Using the Wi-Fi function
314
1
2
Select [Via Network] or [Direct], and connect.
3
Select the PC you want to connect to.
• When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4
Select the folder you want to send.
5
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
6
Take pictures.
• To terminate the connection, follow the steps below:
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[Yes]
• You can terminate the connection or change the send settings by pressing [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a recording is made ([Send Images While
Recording])
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[New Connection]
>
[Send Images While Recording]
>
[PC]
MENU
MENU