145
4. Picture Quality and Color Tone Settings
Applicable modes:
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Settings: [ON]/[OFF]
• [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for
signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
Not available in these cases:
• This function is not available in the following cases:
– When recording motion pictures
– When [Burst Rate] is set to [SH]
– When recording 4K photos
– When using the electronic shutter
Applicable modes:
When the screen periphery darkens as a result of the lens characteristics, you can record
pictures with the brightness of the screen periphery corrected.
Settings: [ON]/[OFF]
• This feature may be automatically disabled, depending on the recording conditions.
• Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Not available in these cases:
• Correction is not possible in the following cases:
– When recording motion pictures
– Recording still pictures while recording a motion picture [only when set to [
] ([Video
Priority])]
– When [Burst Rate] is set to [SH]
– When recording 4K photos
• Depending on the lens used, [Shading Comp.] may not operate.
Refer to the website for compatible lenses.
Reducing the long shutter noise ([Long Shtr NR])
>
[Rec]
>
[Long Shtr NR]
Correcting the brightness on the screen periphery ([Shading Comp.])
>
[Rec]
>
[Shading Comp.]
MENU
MENU
