68
Basic
Taking a Still picture
• Set the drive mode to [
] (single) by pressing
4
(
).
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• When the image is correctly focused, the
picture will be taken, since the [Focus/
Release Priority]
is set initially to
[FOCUS].
¢
1 When AF Mode is set to [
], the first AF area at which focus is achieved may be
displayed momentarily while pressing halfway.
¢
2 A beep will be emitted when focus is first achieved during the pressing halfway.
• When the brightness is insufficient for [AFF] or [AFC], the camera will operate as if
[AFS] has been set. In this case, the display will change to the yellow [AFS].
• The focus indication is displayed as [
] in a dark environment, and focusing may take
longer than usual.
Focus Mode
AFS
Focus
When the subject is
focused
When the subject is not
focused
Focus indication
C
On
Blinks
AF area
D
Green
—
Sound
Beeps 2 times
—
Focus Mode
AFF/AFC
Focus
When the subject is
focused
When the subject is not
focused
Focus indication
C
On
Blinks or Off
AF area
D
Green
¢
1
—
Sound
Beeps 2 times
¢
2
—
60
60
60
3.5
3.5
3.5
B
A
C
D
LOW
DMC-G6PDF-VQT4Z82_mst.book 68 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
