146
Recording
Applicable modes:
By using flashes that support the wireless control (DMW-FL360L: optional), you can
control firing of the built-in flash (or a flash attached to the hot shoe of this unit) and three
flash groups separately.
1
Set the external flashes to be controlled to RC Mode, and then place them.
• Set the channel and groups for the external flashes to be controlled.
2
Select [Flash] on the [Rec] menu.
3
Select [Wireless] and then touch [ON].
• When [Wireless] is set to [ON], [WL] is displayed on the flash icon on the recording
screen.
• When making detailed settings of the wireless flash, set the following from [Flash].
[Wireless Channel]
Select the channel that corresponds to the channel of the external flash you want to
control.
Settings: [1CH]/[2CH]/[3CH]/[4CH]
[Wireless FP]
During wireless recording, an external flash fires an FP flash (high speed repetition of flash
firing). This firing allows recording with the flash at a fast shutter speed.
Settings: [ON]/[OFF]
[Communication Light]
Set the communication light level for wireless recording.
Settings: [HIGH]/[STANDARD]/[LOW]
[Wireless Setup]
• Press the [DISP.] button to fire a test-flash.
A
Firing Mode
B
Flash output
C
Luminosity ratio
Setting the wireless flash
Preparations: Open the flash of this unit by pressing flash open button.
Alternatively, attach a flash (DMW-FL360L: optional) to this unit.
B
A
C
DMC-G6PDF-VQT4Z82_mst.book 146 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
