- 22 -
Preparation
Inserting and Removing the Card (optional)/the
Battery
• Turn this unit off and confirm that the lens barrel is retracted.
• We recommend using a Panasonic card.
1
Slide the release lever in the direction of the
arrow and open the card/battery door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot guarantee the
quality of this product.
2
Battery: Being careful about the battery
orientation, insert all the way until you hear a
locking sound and then check that it is
locked by lever
A
.
Pull the lever
A
in the direction of the arrow
to remove the battery.
Card: Push it securely all the way until you
hear a “click” while being careful about the
direction in which you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
B
: Do not touch the connection terminals of the card.
3
1
: Close the card/battery door.
2
: Slide the release lever in the direction of
the arrow.
Note
• Remove the battery after use. (The battery will be exhausted if left for a long period of time after
being charged.)
• Remove the card or battery after turning this unit off, with the power lamp completely turned off and
the lens barrel retracted completely. (The camera may not function properly, or the card or recorded
contents may be damaged.)
• When using an AC adaptor (optional) instead of the battery, refer to
B