Playback/Editing
- 104 -
Recorded motion picture can be divided in two. It is recommended for when you want to
divide
a part you need with a part you do not need.
It cannot be restored once divided.
Note
• [Video Divide] may not be performed on motion pictures recorded with other equipment.
• Motion pictures cannot be divided at a location close to the start or end of the motion picture.
• With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using [Calendar] or [Video Only] in the
[Filtering Play].
• Motion pictures with a short recording time cannot be divided.
[Video Divide]
Select [
]([Video Divide]) on the [Playback] Mode menu.
Drag the screen horizontally to select a motion picture to divide, and
touch [Set].
Touch [
] at the location to divide.
• Motion picture is played back from the same location when [
] is touched again.
• Make fine adjustments to the division position by touching [
]/ [
] while the motion
picture is paused.
Touch [
].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the
dividing.
