Panasonic Lumix DMC-FX33E Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 52

background image

25

8.4.

Disassembly Procedure for the
Lens

NOTE: When Disassembling and Assembling for the Lens

1. To minimize the possibility of the CCD being dirt, perform

disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.

2. Take care that the dust and dirt are not entered into the

lens.
In case of the dust is putted on the lens, blow off them by
airbrush.

3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown

to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.

6. When repair the fixed frame, drive frame and direct

frame, must be unit exchange.

8.4.1.

Zoom Motor Unit, Master Frange
Unit and 1st Lens Frame/2nd Lens
Frame Move Unit

1. Unscrew the 4 screws (A).
2. Remove the zoom motor unit to the indicated by arrow.
3. Move the master frange unit to the indicated by arrow.

4. Turn the drive gear to the indicated by arrow fully.

5. Push the 1st lens frame unit to the indicated by arrow

from lens side, and then remove the unit of 1st lens
frame/2nd lens frame move unit from the fixed/drive/direct
frame unit.

«
...
23
24
25
26
27
...
»

Содержание Lumix DMC-FX33E





















































Отзывы:

Нет отзывов

Похожие инструкции для Lumix DMC-FX33E

Бренд: C*Pix Страницы: 14

Бренд: MAGINON Страницы: 40

Бренд: Elmo Страницы: 28

Бренд: Pentax Страницы: 2

JENOPTIK C 3.1 SL

Бренд: Concord Camera Страницы: 50

Бренд: Pentax Страницы: 212

Бренд: EastLink Страницы: 4

Бренд: Casio Страницы: 18

Exilim EX-ZR800

Бренд: Casio Страницы: 199

Бренд: XVision Страницы: 62

Бренд: Accu-Scope Страницы: 19

Бренд: Greenleaf Страницы: 4

Бренд: Santec Страницы: 40

Бренд: Elmo Страницы: 52

Бренд: Vivitar Страницы: 28

Lumix DMC-FX30P

Бренд: Panasonic Страницы: 52

Lumix DMC-FX12P

Бренд: Panasonic Страницы: 58

Lumix DMC-FX33P

Бренд: Panasonic Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды