Advanced (Recording pictures)
- 88 -
Note
• When the burst mode setting is set to Unlimited
– The burst speed becomes slower halfway.
The exact timing of this depends on the type of card,
the picture size and the quality.
–
You can take pictures until the capacity of the built-in memory or the card is full.
•
The focus is fixed when the first picture is taken.
•
When the burst speed is set to [
˜
], the exposure and white balance are fixed at the settings used
for the first picture for the subsequent pictures as well. When the burst speed is set to [
ò
], they are
adjusted each time you take a picture.
•
When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
•
If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors
etc. where there is a large difference between the light and shade, it may take time until the exposure
is stable. If burst is used at this time, the exposure may not become optimal.
•
The burst speed (pictures/second) may become slower depending on the recording environment
such as in dark places, if the ISO sensitivity is high etc.
•
Burst mode is not cancelled when the camera is switched off.
•
If you take pictures in burst mode with the built-in memory, it will take time to write the picture data.
• [
Œ
] is set for the flash when burst is set.
• Auto bracket is cancelled when burst is set.
For details on [REC] mode menu settings, refer to
.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
·½¾n
[OFF]/[ON]
Note
•
for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to
[MODE 1].
[DIGITAL ZOOM]
