- 33 -
Preparation
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn
the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
A
Jitter detection demonstration
B
Movement detection demonstration
•
In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
•
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. Press
[MENU/SET] to close [AUTO DEMO].
•
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•
[AUTO DEMO] has no TV output capability.
[FORMAT]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~
[LANGUAGE]
Set the language displayed on the screen.
[DEMO MODE]
Select this to display the camera’s features or [JITTER, SUBJ.
MOVE DEMO.].
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]:
The camera’s features are displayed as a
slide show.
DEMO
A
B
