Panasonic Lumix DMC-F2EB, Руководство по обслуживанию

Страница: 16 / 48

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Main P.C.B. ........................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. System Control Block Diagram ............................................. S-3
S3.2. Video/Audio Process Block Diagram .................................... S-4
S3.3. Sensor Block Diagram .......................................................... S-5
S3.4. Lens Drive Block Diagram..................................................... S-6
S3.5. Power Block Diagram............................................................ S-7
S4. Schematic Diagram .................................................................. S-8
S4.1. Power (P) Schematic Diagram .............................................. S-8
S4.2. Jack (J) Schematic Diagram ............................................... S-12
S4.3. Sensor (SE) Schematic Diagram ........................................ S-13
S4.4. LCD (L) Schematic Diagram ............................................... S-14
S4.5. Digital (D) Schematic Diagram ............................................ S-16
S4.6. Gyro (GY) Schematic Diagram ........................................... S-20
S4.7. System Driver (SY) Schematic Diagram ............................. S-21
S4.8. Rear Operation (R) Schematic Diagram ............................. S-22
S4.9. Main Connection (MC) Schematic Diagram ........................ S-24
S5. Print Circuit Board .................................................................. S-28
S5.1. Main P.C.B. ......................................................................... S-28
S5.1.1. Main P.C.B. ...................................................................... S-28
S5.1.2. Main P.C.B. Address Information ..................................... S-29
S6. Replacement Parts List .......................................................... S-31
Table of contents
Service Manual
DSC1003025CE
Diagrams and Replacement
Parts List
Vol. 2
(S)...........Silver Type (except PC/EF)
Colour
(K)...........Black Type
(P)...........Pink Type (except PC/EF)
Model No.
DMC-F2P
DMC-F2PC
DMC-F2PR
DMC-F2PU
DMC-F2EB
DMC-F2EE
DMC-F2EF
DMC-F2EG
DMC-F2EP
DMC-F2GC
DMC-F2GF
DMC-F2GN
Digital Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice