11. Using the Wi-Fi/Bluetooth function
230
Connecting to a smartphone
You can use a smartphone to operate the camera from a remote location.
You need to install “Panasonic Image App” (referred to as “Image App” from this point on)
on your smartphone.
• OS
• Use the latest version.
• Supported OSs are current as of September 2018 and are subject to change.
• The service may not be able to be used properly depending on the type of smartphone being
used.
Refer to the support site below for details about the “Image App”.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
• When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
• Read the [Help] in the “Image App” menu for further details on how to operate.
• When you operate the “Image App” on the smartphone that is connected to the camera via
Wi-Fi, [Help] in the “Image App” may not be displayed depending on the smartphone. In this
case, after terminating the connection to the camera, reconnect the smartphone to a mobile
phone network such as the 3G or LTE network or to a Wi-Fi router, and then display [Help] in
the “Image App”.
• Some of the screens and information provided in these operating instructions may differ from
your device depending on the supported OS and “Image App” version.
Installing the smartphone/tablet app “Panasonic Image App”
App for Android
TM
: Android 4.4 or higher
(Android 5.0 or higher is required to use the Bluetooth function)
App for iOS:
iOS 9.0 or higher
(The Bluetooth function cannot be used with the iPad 2)
1
Connect the smartphone to a network.
2
(Android)
Select “Google Play
TM
Store”.
(iOS)
Select “App Store”.
3
Enter “Panasonic Image App” or “LUMIX” into the search box.
4
Select “Panasonic Image App”
and install it.