
10. Using Menu Functions
204
Brightness, colour, or red or blue tint of the monitor/viewfinder is adjusted.
1
Select the settings by pressing
3
/
4
, and adjust with
2
/
1
.
2
Press [MENU/SET] to set.
[Monitor Display]/[Viewfinder]
• It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is
in use.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Monitor Luminance]
„
(Auto)
The brightness is adjusted automatically depending on how bright it
is around the camera.
(Mode 1)
Make the monitor brighter.
(Mode 2)
Set the monitor to the standard brightness.
(Mode 3)
Make the monitor darker.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
• The monitor automatically returns to standard brightness if no operations are performed for
30 seconds when recording in [
]. It will light up brightly again with button or touch
operation.
• When [
„
] or [
] is set, the usage time is reduced.
• [
„
] is only available in the Recording Mode.
• When the AC adaptor (optional) and DC coupler (optional) are used, the initial setting is [
].
…
1
…
2
…
3
…
1
…
1
…
2