Firmware Ver. 2.3
F-26
This sets the operation to be performed when [
] (White Balance), [
] (ISO sensitivity)
or [
] (Exposure Compensation) is pressed.
• Press the function button assigned with [Operation Lock] to disable the operations.
This can disable the status indicator and the WIRELESS connection lamp.
If you select [OFF], they will not light/flash.
Settings: [ON]/[OFF]
[WB/ISO/Expo. Button] has been added to the [Custom] menu
>
[Custom]
>
[Operation]
>
[WB/ISO/Expo. Button]
[While Pressing]
Allows you to change the setting while pressing and holding the button.
[After Pressing]
Allows you to change the setting after pressing the button.
[Dial] has been added to [Operation Lock Setting] in the [Custom] menu
>
[Custom]
>
[Operation]
>
[Operation Lock Setting]
[Dial]
Disables the front, rear, and control dial operations.
[Power / Wireless Indicator] has been added to the [Setup] menu
>
[Setup]
>
[Power / Wireless Indicator]
MENU
MENU
MENU