12. Others
320
If you use the shutter remote control (DMW-RSL1: optional), you
can avoid jitter (camera shake) when using a tripod and you can
keep the shutter pressed fully when taking pictures with [B] (Bulb) or
Burst Mode. The shutter remote control works similar to the shutter
button on the camera.
By using the AC adaptor (optional) and DC coupler (optional), you can record and play
back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor
(optional).
Shutter Remote Control (optional)
• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).
• Record with Creative Video Mode
when using for motion picture recording. Motion
picture recording can be started/stopped with the shutter remote control.
• Read the operating instructions of the shutter remote control for details.
Not available in these cases:
• You cannot use the shutter remote control for the following operation.
– Canceling [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting]
AC adaptor (optional)/DC coupler (optional)
• Always use a genuine Panasonic AC adaptor (optional).
• When using an AC adaptor (optional), use the AC cable supplied with the AC adaptor.
• When the DC coupler is being mounted, the DC coupler cover opens, so the structure
ceases to be dust-proof and splash-proof.
Be careful not to allow sand, dust and water etc. to adhere to or enter the structure. After use,
check that there is no foreign matter attached to the coupler cover, and close it firmly.
• Also read the operating instructions for the AC adaptor (optional) and DC coupler.
