6. Stabilizer, Zoom and Flash
160
3
Select the menu.
4
Press
3
/
4
to select an item and then press [MENU/SET].
• Press [DISP.] to fire a test-flash.
A
Firing Mode
B
Flash output
C
Luminosity ratio
¢
1 Not available when [Wireless FP] is set to [ON].
¢
2 This option is not displayed when the flash (DMW-FL200L: optional) is attached to the
camera.
>
[Rec]
>
[Flash]
[Wireless]
Select [ON].
[Wireless Channel]
Select the channel you have set for the wireless flashes in
step
2
.
[Wireless Setup]
Proceed to step
4
.
[External
Flash]
¢
1
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]
¢
2
:
Flash output is set by the external flash.
[MANUAL]:
Set the luminosity ratio of the external flash manually.
[OFF]:
The flash on the camera side emits only communication light.
[Flash Adjust.]
Set the flash output of the camera manually when [Firing Mode] is set to [TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]
¢
1
:
The wireless flashes automatically set the output.
[MANUAL]:
Set the luminosity ratio of the wireless flashes manually.
[OFF]:
The wireless flashes of the specified group will not fire.
[Flash Adjust.]
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
MENU
