2. Getting Started/Basic Operations
22
∫
[CHARGE] indicator
• When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10
o
C and 30
o
C (50
o
F and 86
o
F).
– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫
Charging time
When the charger (supplied) is used
• The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not been
used for a long time may be longer than normal.
∫
Battery indication
• The battery level indicated on the screen is approximate. The exact level varies depending on
the environment and the operating conditions.
On:
Charging.
Off:
Charging has completed.
(After charging is complete, disconnect the AC adaptor (supplied) from
the power outlet and remove the battery.)
Charging time
Approx. 190 min
A
Monitor
display
B
Status LCD
display
75% or higher
74% to 50%
49% to 25%
24% or below
Low battery
• Recharge the battery or replace it
with a fully charged battery.
Blinking red
Blinks
• Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
• Do not use any other USB connection cables except the supplied one.
This may cause malfunction.
• Do not use any other AC adaptors except the supplied one.
This may cause malfunction.
• Do not use a USB extension cable.
• Do not use the AC adaptor (supplied) and the USB connection cable (for charger) for other
devices. Doing so may cause malfunction.
• The AC adaptor is in the standby condition when the mains plug is connected. The primary
circuit is always “live” as long as the mains plug is connected to an electrical outlet.
98
AFS
AFS
L