Panasonic Lumix DC-FT7EB, Руководство по обслуживанию

Страница: 33 / 45

33
9 Measurements and Adjustments
9.1. Introduction
When servicing this unit, make sure to perform the adjustments necessary based on the part(s) replaced.
NOTE: (When replacing the Main Sub Unit)
• It is necessary to use the “V50_USBDriver” and “ck36600 Write Test Flag AP ver 01.01.20180319.00”.
• It is necessary to use the ”Enable Test.txt”
• The Adjustment software and text file are available at “TSN Website”.
9.2. About Light Box
When using VFK1164TDVLB Light Box
If using VFK1164TDVLB Light Box, remove the lens connection ring by loosing thumbscrew and three hexagon screws.
* RFKZ0523 Light Box has no lens connection ring.
How to remove the Front Hood
In order to utilize maximum of the diffusing surface of Light Box, some adjustment items need the distance between diffusing
surface of Light Box and camera body becomes several cent-meters.
Before the adjustments, remove the front hood of Light Box following steps below.
[ For VFK1164TDVLB Light Box ]