Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 94 / 334

94
3-3-2 Mark Expiry Date/Time
Sample
06 13
Expiry Date
Month Date
Time limit (EXPIRY) : 30 days
Displayed number of digits (Figure) : 2
Display format
: Month/Date
Display leading zeros (Zero Indi.) : Enable
The expiry date (30 days later) is marked.
2. Input the function character of the expiry date.
1. Set the expiry date.
Refer to “3. Set the marking layout” (P.85) and “4. Set the laser condition” (P.86) in “3-2-3 Set the marking
data” (P.83).
3. Set the conditions of the function character for the expiry date and laser.
Notice
• The following items, Date, Lot, and Expiry date are marked based on the internal clock of the laser marker.
The internal clock might be deviated caused by the error of the internal parts or degree of the battery drain. Therefore,
be sure to check the time of the internal clock before the operation without fail.
Reference
• For details on the expiry date function, refer to “4-9-1 Expiry Date” (P.162).
• By using “TIME HOLD IN” signal of the I/O connector pin No. 23, the functional characters such as date/time and lot
do not update and the laser marker marks the time and date at the point when the input was turned ON. For the TIME
HOLD IN function, refer to the “External control manual”.
ME-LP400V-OP-6