Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 64 / 334

64
2-1-3 Rotation of LP-400 Standard Head Scanner
For the standard head models of LP-400 series (LP-430U / LP-420S9U / LP-410U / LP-431U / LP-420S9U / LP-411U / LP-
435U / LP-425S9U), the angle of the head scanner unit can be set freely.
* This function is specific to the standard head model of LP-400 series. It is not equipped in the tower head model.
⿎
Rotation Method
• The head scanner can be rotated up to 350 degrees by loosening the hexagon socket head cap screw (M4).
After rotating the scanner unit, fix it tightly.
• The tightening torque shall be 1.5N·m or less.
Loosen
Approx. 200 degree
Approx. 150 degree
M4 Hexagon Wrench
WARNING
• Never use the laser marker with the setscrew for scanner angle loosened.
Failure to do so could rotate the head during the operation and cause laser
emission to the dangerous direction.
⿎ Center of Rotation
[Unit: mm]
51.2
130
158.4
91
15.8
14.2
41
115.5
15.8
28
29.2 129.2 31.8
119
29 129 31.8
3.5
107.2
63
3.5
141 161
61
End Standard
for Base
Approx. 60°
Center of
Rotation Axis
Approx. 20°
Dead Angle:
Approx. 10°
ME-LP400V-OP-6