Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 326 / 334

326
Readable DXF File
This laser marker can read the DXF format file described below.
• DXF-R12J, R13, R14 format
The data created either by AutoCADLT (AutoCAD are produced by Autodesk, Inc.) is recommended to apply as the DXF
format file data to be read. Followings are how to create DXF format file using AutoCADLT.
• DXF-R12J, R13, R14 format
The DXF-R12J, R13J, R14J format file to be created by AutoCADLT can be prepared using the “Writing” function in “File”
menu of AutoCADLT.
At this time, select “AutoCADLT R2/R12J/R13J/R14DXF” from “File Format” in “Data Writing” dialog, and then click [Save]
button.
Refer to “Operation Method” that is appeared on the screen by searching the reference pages on the online help of
AutoCADLT using the keyword such as “Writing”.
„
Graphic Applied on AutoCADLT and Corresponding Table for Marking Object
using Laser Marker
DXF Version Entity Name Graphic Name
Applica-
bility*
Remarks
R12J
3DFACE 3D face N
3DLINE 3D line N
ARC Arc Y Converted into segment and output.
ATTDEF Attribute definition N
ATTRIB Attribute N
CIRCLE Circle Y Converted into segment and output.
DIMENSION Dimension N
INSERT Insert graphic Y Converted into each graphic element and output.
LINE Segment Y Output with segment.
POINT Point N
POLYLINE
2D Polyline Y
Converted arc into segment and output.
Bold line is not supported.
3D Polyline N
SEQEND Close Y Applicable only for reproducing polyline.
SHAPE Shape N
SOLID 2D paint Y
Output outline into segment and output internal
into horizontal/vertical segment.
TEXT Character Y
Converted character with specified font into
segment and output.
TRACE Bold line N
VERTEX Top Y Applicable only for reproducing polyline.
VIEWPORT View port N
ME-LP400V-OP-6