Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 273 / 334

273
Maintenance Items
Listed below are typical parts that require cleaning or replacement depending on the usage environment or duration of
service of the laser marker. Some parts are maintainable by the customer, and other parts are required to be repaired or
replaced by our service representative, depending on the types of parts and the defects.
For purchasing replacement parts or requesting our service representative to repair or replace parts, contact our sales
agency.
LP-400 Series
ui
y
y
e
e
o
ert
er
ert
e
et1)
q
q
ui
Head (Standard Model) Head (Tower Model) Controller
LP-V/LP-W Series
ui
qw
y
o
er
ert
et1)
Controller
Head
No. Parts name
Main cause for
degradation
Daily maintenance Replacement when degraded or defective
q
Laser emission port (f
θ
lens) Contamination Cleaning Replacement at our service department
w
Protection glass of the laser
emission port *1 Contamination Cleaning Customer-replaceable
e
Intake/exhaust vent Contamination Cleaning ―
r
Air filter Contamination Cleaning Customer-replaceable
t
Air-cooling fan Contamination ― Replacement at our service department
y
Laser oscillator Aging Check output Replacement at our service department
u
Galvano scanner Aging ― Replacement at our service department
i
Internal shutter Aging ― Replacement at our service department
o
Battery inside the controller Aging ― Replacement at our service department
1)
Fuse Blown ― Customer-replaceable
1!
Cable Broken ― Customer-replaceable
*1 : The protection glass of the laser emission port is available only for LP-V/LP-W series.
ME-LP400V-OP-6