Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 220 / 334

220
4-12-2 Marking to Flying Object
The trigger conditions at marking to flying object are set.
⿎
Moving Direction
The moving direction of line at marking to flying object is set
Reference
• The moving direction is common in the all files.
LP-400 Standard model LP-400 Tower head model
LP-V/LP-W Series
Notice
• Overlapping marking, Step & Repeat marking, point radiation, or Reset at date update functions cannot be used with the
marking to flying object.
• Equidistant marking on the flying object cannot be used in combination with rank marking, external offset, and serial
data marking function.
• In the case of using the function of marking bold character, there might be the possibility that the marking quality is
affected. Therefore, operate the laser marker after performing the marking test using the function of marking bold
character.
• Since the marking to the flying object is affected by vibration or line speed easily, marking and reading 2D code or bar
code to the flying object might become unstable. Therefore, when marking 2D code or bar code to the flying object,
check the marking and reading state of the marked code on the flying object sufficiently.
• If the rank, external offset, or serial data marking functions are used with the marking to the flying object (excluding the
equidistant marking), make sure that the marking interval time is enough to the required period to input the marking data
and to confirm the marking ready output.
ME-LP400V-OP-6