Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 155 / 334

155
⿎ Counter
When inputting counter character, the counter is marked with the condition set previously.
Set the expiry date function “4-9-2 Counter” (P.164), and set the character.
Refer to “3-3-4 Mark Counter” (P.101).
Reference
• To update the function characters such as current date, expiry date, lot, counter, and etc. on the operation monitor, set
the “Update Func. Char.” in the environment setting screen referring to “4-16-1 Display Setting (Environment 1)” (P.253).
• The counter does not operate at test marking mode.
2
4
5
1
3
Description
1 Counter (Counter No.):
Select the No. of the counter condition set in the function screen.
Setting Range
Counter No.: 0 to 3
Common counter No.: 4 to 7
Notice
• The counters 0 to 3 are commonly set per 256 file. For example, the counters 0 to 3 with file No. 0 are applied the
same counter of that of 256, 512, 768, 1024, 1536 and 1792 files.
2 Figure:
Sets the digit number to show the counter. When the number of figures of the value to be marked is larger than
setting figure, the lower figure is marked as the number of figures set previously.
Setting Range 1 to 6 figures
3 Offset:
Adds the setting value to the counter value, and marks its value.
Setting Range 0 to 9
4 Numbers:
Displays number.
Setting Range Binary numbers to 36 numbers
ME-LP400V-OP-6