Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 21 / 240

21
1-2 Product Configuration
1-2-1 Basic composition
This product is a laser marker designed to mark and process the object by radiating a laser beam to the target.
The laser marker LP-RH series consists of the following units mainly.
ABCD
e
r
q
t
w
y
No. Name Description
q
Head It is the unit that radiates the laser beam. The optical parts and
the scanner are loaded inside.
w
Controller It is the unit that generates the marking data. The main power
supply and connection interface with external devices are
loaded.
e
Unit power cable (Attached accessory)
Signal cable (Attached accessory)
Cables to connect the head and controller.
r
AC power cable (Optional item) Cable to supply AC power to the controller. Use the specified
optional cable or a cable with the enough rating capacity to
fulfil the power voltage specification of this product, which is
compliant with the regulations and standards in the country or
region where it is used.
t
USB cable for Laser Marker NAVI smart
(Attached accessory)
When connecting Laser marker NAVI smart and laser marker via
USB, connect the controller and PC.
y
Commercially available PC
(Not included in this product.)
Install the dedicated software “Laser Marker Smart Utility” onto
a PC and set the marking data of the laser marker. You can use
this PC as a monitor during the operation.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Download the laser marker configuration software “Laser Marker NAVI smart” from our Internet website. For details,
refer to “1-2-4 Download software and manual” (P.25).
ME-LPRH-SM-3