Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 151 / 240

151
6-1-3 Connection
ワㄐㄕㄊ㄄ㄆ
• To prevent damage of the image checker, do not install the camera in the laser emission area. Besides, take measures
to protect the camera against the reflected laser beam, such as installing a shutter in front of the camera lens.
„
Connectable image checker
Image checkers compatible with this product are listed below.
Usage Model Manufacturer name
Position correction PV230 / PV200 Panasonic Devices SUNX Co, Ltd.
Code checking PV230
DataMan series (Ethernet supported model)
Cognex Corporation
Character checking PV230 Panasonic Devices SUNX Co, Ltd.
Image capturing and inspection PV230 / PV200
„
Connection method
Use the Ethernet port on the laser marker controller and connect the image checker to link.
This product can be connected with one device each for position correction and code reading.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For details of specifications and connection of the Ethernet port, refer to “5-3 Ethernet” (P.143).
„
Connection example
To connect a position correction device (PV230), code reader (DataMan) and control PLC with the laser marker
PLC
(For I/O control)
Laser marker
PV230
(For position correction)
DataMan
(For code reading)
HUB
Example of communication system settings
To prevent duplication of IP addresses of network devices, set individual addresses.
Laser marker
PV230
(For position correction)
DataMan
(For code reading)
IP address 192.168.1.4 192.168.1.5 192.168.1.10
Subnet mask 255.255.255.0
Default gateway 192.168.1.1
Port
―
Fixed value
(Result output: 8601)
(Command transmission: 8604)
23 (Telnet)
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Port on the laser marker side is a fixed value when PV230/PV200 is used.
• Align the Port (command transmission) on the laser marker with DataMan's TelnetPort setting value when DataMan is
used.
• When the laser marker is connected an image checker one to one, no HUB is necessary.
• The Ethernet port of this product is compatible with both straight cable and cross cable.
ME-LPRH-SM-3