Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 132 / 240

132
4-6-15 Counter reset input
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
T5
T1
T2
T3
T1
T4
SELECT 0 - 2 IN (No.19-21)
D0 - D15 IN (No.3-18)
SET IN (No.2)
*1
*2
TRIGGER IN (X5)
READY OUT (Y5)
PROCESSING OUT (Y10)
SET OK OUT (No.28)
Item Time Remarks
T1 2ms or more Keep the ON status for 2ms or more.
T2 0ms or more Keep the input until SET OK OUT (No.28) turns on.
T3 2 to 510ms One-shot output. Set the output time on the system settings screen. There is a small
margin of error for the setting value.
T4 0ms or more Turn on TRIGGER IN (X5) after SET OK OUT (No.28) turns on.
T5 0.5ms or more After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN to
D15 IN, turn on SET IN (No.2).
*1 : To reset the counter, set SELECT 0 IN to SELECT 2 IN as follows.
SELECT 0 IN (No.19): OFF, SELECT 1 IN (No.20): OFF, SELECT 2 IN (No.21): ON
*2 : Specify the counter number to reset by using D0 IN to D15 IN (No.3 to 18). The following counter numbers are
assigned to D0 IN to D15 IN respectively.
• D0 to D3: Counter No. 0 to 3
• D4 to D7: Common Counter No. 16 to 19
• D8 to D11: Counter No. 4 to 7
• D12 to D15: Common Counter No. 20 to 23
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• If the counter is reset during on-the-fly marking operation, READY OUT (Y5) turns off momentary and there is a case
that the next marking could not be executed due to Warning E751.
ME-LPRH-SM-3