Panasonic LP-RF Series, Руководство по установке и обслуживанию

Страница: 171 / 218

171
7-2-7 Laser oscillator
A fiber laser oscillator is installed in the controller. The laser beam output from the oscillator is delivered through the fiber
cable to the head. The laser is scanned and focused in the head and emitted to the target materials.
„
Effect from deterioration
Laser output characteristics such as laser power will deteriorate over time due to aging of oscillator. As the laser output
characteristics deteriorate, symptoms such as ununiform marking density, chipped characters, or unstable processing
quality, etc. may occur.
Also, as cooling efficiency of the oscillator decreases because of the usage environment, the electronic parts in the
oscillator may become defective and unable to irradiate the laser.
„
Replacement interval
• Deterioration in quality of marking and processing (streaking and density reduction of the marking, incomplete
processing) is observed.
• Setting a large value for the laser power is not reflected in the quality of marking and processing.
• The laser power measured with a commercial power meter has decreased by 20%, compared to the delivery status.
• The laser radiation time has exceeded 30,000 hours.*
• Alarm for laser error occurred.
* The replacement interval may differ depending on the usage environment and marking conditions.
„
How to confirm operating hours
Go to the “Maintenance” screen and select “Operating data”.
“Laser radiation time [h]” is displayed.
„
Replacement method
Our service representative handles the maintenance and replacement. Contact our sales office.
ME-LPRF-SM-11