Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 38 / 190

38
2-3-3 Marking field and marking center position
Specified point LP-GS051 LP-GS051-L LP-GS052
A : Work distance
Base position 111 mm 71 mm
Setting range *1 108 mm to 114 mm – 69.5 mm to 72.5 mm
B : Marking field (X, Y) 55 mm × 55 mm 30 mm × 30 mm
C : Distance to center of marking field 54 mm 50.5 mm
*1 : For models without “-L” in the model code, the work distance (Z-position) may be changed within the extent indicated
in this table.
B
A
B
C 139
Unit: mm
Marking
center
Diameter of laser
output range
φ
66
ワㄐㄕㄊ㄄ㄆ
• Do not place anything in the area between the laser emission port and work pieces during the lasing operation.
• Use anti-reflection material (ex. black paint for metal) for an external shutter or a protective enclosure in a path of laser
beam. It may cause a failure of the components inside the laser marker head.
• If any other devices such as a sensor or a camera are installed near the laser marker, make sure that these devices are
installed in the place where laser beam and its reflected beam do not damage to them.
ME-LPGS-SM-8