Panasonic LP-ABR10-C5 Скачать руководство пользователя страница 4

Страница: 4 / 103

Handle with care



This product has a memory backup function. This backup data restoration cannot

be guaranteed if repair, reconstruction, or upgrades are performed on this product.



DO NOT use this product at temperature or humidity ranges beyond that

documented in the product specifications, or in direct sunlight.



DO NOT expose this product to water, moisture, oil, etc.



This product may be damaged in environments containing corrosive gas.



DO NOT use any chemicals when cleaning.



To clean the reading window, wipe lightly with cloth or swab.



This is a high-precision optical device, avoid exposing this product to excessive

force such as that sustained by a drop.



Do not install electrical wiring or plugin/unplug of cable (except LAN cable) when

this product is powered on. These may result in an electrical damage to this

product.



To minimize the risk of data loss, make sure to backup the hard drive before install

the software. Our company shall not be responsible for any troubles such as data

loss or damages.



If this product is installed near the laser marker, make sure that it is installed in the

place where laser beam and its reflected beam do not damage to this product.



Store away from direct sunlight and direct vibration or shock for long term storage.

Do not store this product at temperature or humidity ranges beyond that

documented in the product specifications.

Содержание LP-ABR10-C5








































































































Результаты поиска

Содержание LP-ABR10-C5

Отзывы:

Похожие инструкции для LP-ABR10-C5

Бренды по названию

Популярные бренды

Panasonic LP-ABR10-C5, Руководство по установке и эксплуатации

Результаты поиска

Содержание LP-ABR10-C5

Отзывы:

Похожие инструкции для LP-ABR10-C5

Бренды по названию

Популярные бренды