Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 74 / 180

74
3-6 Communication Command List
Category Name Code Function Page
O
pe
rat
io
n c
on
tro
l
Command reception
permission MKM Controls the reception permission (reception mode
ON/OFF) for setting and readout of communication
commands. P.78
Laser pumping LSR Controls the laser pumping ON/OFF. P.79
Shutter SHT Controls the internal shutter opening/closing. P.79
Status request STS Requires the operation status of laser marker, such as
ready status and error occurrence status. P.80
Marking status sending
permission MST Enables automatic response of marking result (e.g.
normal end, and error occurrence, etc.) at the end of
marking. P.81
Marking trigger MRK Inputs marking trigger (laser radiation startup trigger). P.82
Guide laser control GID Controls radiation of red guide laser for marking
position confirmation.
P.82
Fi
le
File change (No. specified) FNO Specifies the file No. to change the file. P.83
File change (Comment
specified)
FNN Specifies the file name (comment) to change the file. P.83
File overwriting registration FOR Overwrite and register the file under editing. P.83
File registration FRG Register the file under editing to the specified No. P.84
File name FNM Sets name (comment) of file under editing. P.84
C
ha
ra
ct
er i
np
ut
Marking character string
(ASCII code specified)
MCS Sets the marking character string by ASCII code.
(For alphanumeric and symbols only) P.85
Marking character string
(Shift-JIS code specified)
STR Sets the marking character string by shift-JIS code.
(For characters including KANA, KANJI and function
characters) P.85
Serial data input SIN Sets the character string specified for “Serial Data
Function” to change characters for each marking.
P.87
Rank condition RKC Sets input conditions of “Rank Function” to switch
characters using I/O input. P.89
Rank character string RKS Sets character string used for “Rank Function” to
switch characters using I/O input. P.89
ME-LP400V-EX-6