Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 135 / 180

135
⿎ Flying object wait : MWT
Sets the waiting time for marking corresponding to the line speed for flying object marking.
• Setting / Readout data of flying object wait
STX MWT
Sub
command
[Flying object wait]
6-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of flying object wait
STX MWT R (Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Flying object wait 6 “000.00”–“500.00” [ms]
Available only when the moving direction of marking
object is other than “still”.
⿎ Line speed : LSP
Sets the line speed in flying object marking.
• Setting / Readout data of line speed
STX LSP
Sub
command
[Line speed]
7-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of line speed
STX LSP R (Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Line speed 7
Model type* Setting range [m/min.]
LP-V10/LP-V15/
LP-430/LP-435/
LP-420/LP-425
“000.060”–“240.000”
LP-W/LP-431/
LP-421
“000.060”–“120.000”
LP-410 “000.060”–“170.000”
LP-411 “000.060”–“085.000”
The speed with which the object to be
marked passes is indicated, available
only when the traveling direction is
other than “still” and encoder signal is
“OFF”.
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6