Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 111 / 180

111
⿎ VEC logo conditions : CDC
Sets the marking condition of VEC (work shape converted for laser marker) logo file.
• Setting / Readout data of VEC logo condition
STX CDC
Sub
command
[Logo No.] [Area No.] [X scale] [Y scale] [X position]
[Y position] [Rotation angle] [Laser power correction]
[Scan speed correction]
[Laser pulse cycle correction]
51-byte (LP-V series),
48-byte (LP-400/LP-W series)
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of VEC logo condition
STX CDC R
[Logo No.]
2-byte
(Check sum) Delimiter
Name
Data
length
[byte]
Content Remarks
Logo No. 2 “00”–“15”
Area No. 1 “0”–“9”, “A”–“F”
Specifies which area part is the marking position of
the concatenated marking on the flying object.
In case of marking static object, specify “0”.
X scale 8
“0010.000”–“1000.000” [%]
Y scale 8
X position 8
“-300.000”–“+300.000” [mm] Specifies the origin coordinate of the logo.
Y position 8
Rotation angle 7 “-180.00”–“+180.00” [°]
The center of the rotation is the origin position of
logo file.
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated using the value
set at the laser setting as 100%.
• With LP-400/LP-W series, nothing should be
input in Laser Pulse Cycle Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
Reference
• Use the CDD Command for the condition setting of DXF file. The common parameters with VEC and DXF files are
changed by either CDC/CDD command.
ME-LP400V-EX-6