Panasonic Live Production Suite Series, Руководство по эксплуатации

Страница: 93 / 176

– 93 –
Chapter 5 Basic Operations — Video memory
Video memory
The unit can store and use the still image memory (Still) and the moving image memory (Clip), each in 2 channels.
f
Images with key signals can be saved in the video memory (still images and moving images).
f
The number of seconds which can be saved in the moving image memory varies depending on the system format.
f
Number of frames that can be saved in 1 channel
Recording
mode
([Quality])
System format
2160/59.94p 2160/50p 1080/59.94p 1080/50p 1080/59.94i 1080/50i
[High]
Up to 450 frames
(Approx. 7.5 seconds)
Up to 450 frames
(Approx. 9 seconds)
Up to 1800 frames
(Approx. 30 seconds)
Up to 1800 frames
(Approx. 36 seconds)
Up to 1800 frames
(Approx. 60 seconds)
Up to 1800 frames
(Approx. 72 seconds)
[Standard]
Up to 900 frames
(Approx. 15 seconds)
Up to 900 frames
(Approx. 18 seconds)
Up to 3600 frames
(Approx. 60 seconds)
Up to 3600 frames
(Approx. 72 seconds)
Up to 3600 frames
(Approx. 120 seconds)
Up to 3600 frames
(Approx. 144 seconds)
f
Audio data cannot be saved in the video memory.
f
If the power is turned off or if the video format is changed, the data in the video memory will be deleted.
f
Video memory data can be saved to or loaded from the storage modules fitted to the System Manager Unit, memory cards in the control panel
connected to the LAN subnet the unit is connected to, or a computer connected to the LAN subnet the external device is connected to.
Live Production Suite system
Terminal for the
LAN subnet the unit
is connected to
Terminal for the
LAN subnet the
external unit is
connected to
Still 1V
Still 1K
Still 2V
Still 2K
Clip 1V
Clip 1K
Clip 2V
Clip 2K
From XPT
VMEM F
VMEM S
To XPT
STILL V/K 1, 2
1 frame
(volatile memory)
CLIP V/K 1, 2
(volatile memory)
Storage Module (SSD)
Still Register: Max. 81
Clip Register: Max. 81
(non-volatile memory)
Control Panel
Local computer
Memory card
Storage
Recording still images (Still)
Input images selected on the VMEM F/S buses can be recorded.
f
Image data created using a computer can be loaded.
For details, refer to “Operating the register memory”.
f
This operation can be also performed in the multi-selection panel area.
For details, refer to “Video memory menu”.
1
Select the <MEM> button
→
[STILL]
→
[Still] tab.
2
Select the channel from either [STILL1] or [STILL2] and then select [Capture].
f
When [Capture] is selected, the source selected on the VMEM bus is recorded as still images for the selected channel.
When the recording of the still images is completed, thumbnails of the still images are displayed on the thumbnail screen.
Various settings when recording still images (Still)
1
Select the <MEM> button → [STILL] → [Still] tab.
2
Select an item in [Key Enable].
f
Set whether to record key signals at the same time.