Panasonic Live Production Suite Series, Руководство по эксплуатации

Страница: 134 / 176

– 134 –
Chapter 8 System Menu — Maintenance settings
@ @ NOTE
t
Each item in the [Panel 1 Connecting]/[Panel 2 Connecting]/[Panel 3 Connecting] columns will display the value counted up in the Live Production
Suite system. Therefore, the displayed value will not change even if the control panel 1 or the control panel 2/3 connected to the Live Production Suite
system is replaced.
Setting the date and time
The date and time to be used as the time stamp of the memory card can be set. Make sure to set them when using a memory card. They can be
displayed on the split screens of the MultiView display.
Setting the date
1
Select the <SYS> button
→
[MAINTENANCE]
→
[Misc] tab.
f
The date currently set will be loaded when the [Misc] tab page is opened.
2
Set the [Year], [Month], and [Date] in the [Date] column.
f
Set the year, month, and day.
f
The date currently set will be reloaded if [Get] in the [Date] column is selected.
3
Select [Set] in the [Date] column.
f
Modified items will be set.
Setting the time
1
Select the <SYS> button → [MAINTENANCE] → [Misc] tab.
f
The time currently set will be loaded when the [Misc] tab page is opened.
2
Set the [Hour], [Minute], and [Second] in the [Time] column.
f
Change the hour, minute, and second.
f
The time currently set will be reloaded if [Get] in the [Time] column is selected.
3
Select [Set] in the [Time] column.
f
Modified items will be set.