57
Operations
Operating the control panel
Email Notice <Config>
Makes settings for email notification.
≥
SMTP is used for email notification. Note that no email receiving function is available.
≥
Selecting “Save” will execute the operation.
≥
Selecting “Test” at the bottom of a screen will execute the operation.
Notify Errors
Selects the use or non-use of an email notification at error occurrence.
On: Notifies an error.
Off: Notifies no error.
≥
The initial setting is “Off”.
Notify Warnings
Selects the use or non-use of an email notification at warning occurrence.
On: Notifies a warning.
Off: Notifies no warning.
≥
The initial setting is “Off”.
To Email Address
Inputs an email destination address.
≥
A maximum of 256 characters can be input.
SMTP Server Address
Sets an SMTP server address.
≥
Input an IPv4 address, IPv6 address, or fully qualified domain name (FQDN, a
maximum of 39 characters).
Host Name
Sets a host name.
≥
The host name is used for email notification.
≥
A maximum of 32 characters can be input.
≥
The initial setting is “LB-DH8”.
Domain Name
Sets a domain name.
≥
A maximum of 32 characters can be input.
≥
The domain name is used as an email source address.
