54
Operations
Operating the control panel
Date/Time Setting
These settings are for unit date and time.
≥
The settings are used for the date display on the control panel or the Web
interface, in the event of an error or warning, and for recording internal logging
dates or magazine detail information.
≥
The writing or access date of files or folders to be wrote in the magazine is set by
the server file system.
Date/Time
Time Server
Sets the use or non-use of a timeserver.
On: Enables a timeserver to synchronize the
time. The synchronization interval is
256 seconds.
Off: Disables a timeserver.
≥
The initial setting is “Off”.
Time Server Address
Inputs a time server address.
≥
Inputs an IPv4 address, IPv6 address, or fully
qualified domain name (FQDN, a maximum of
256 characters).
Date/Time
Sets the date and time.
≥
This item is available when “Time Server” has
been set to “Off”.
Time Zone DST
Time Zone
Sets the time zone.
≥
The date and time are set according to the
time zone setting.
≥
The initial setting is “GMT+09:00”.
DST
Sets the use or non-use of Daylight Saving Time.
≥
The Daylight Saving Time setting is not
programmed to start and end automatically.
Switch the setting for each time change of
each area.
On: Sets the time 1 hour forward.
Off: Uses the regular time setting.
≥
The initial setting is “Off”.
Date/Time Format
12h/24h
Sets the time display method.
12h: Uses a 12-hour system for time display.
24h: Uses a 24-hour system for time display.
≥
The initial setting is “12h”.
Date Format
Sets the date display format.
YYYY/MM/DD: Switches to the year-month-
day format.
MM/DD/YYYY: Switches to the month-day-
year format.
DD/MM/YYYY: Switches to the day-month-
year format.
≥
The initial setting is “YYYY/MM/DD”.
