25
Care
Installation
24
Troubleshooting
Important
■
Install the appliance in accordance with the
Installation Instructions. Otherwise, the performance
of the appliance may be affected.
■
The installer is responsible for proper installation.
Any malfunction or accident resulting from the failure
to follow the instructions is not covered by the
warranty.
■
Make sure to have a qualifi ed gas technician or
personnel from gas company close the gas valve
when replacing the gas appliances with this unit.
■
Do not install an oven under the cabinet.
■
After installation, perform an electrical test.
■
Explain to the customer how to use the appliance
correctly.
■
Provide the Operating / Installation Instructions to
the customer for the local electrical inspector’s use.
■
KY-A227E is for built-in only. Do not use KY-A227E
as free-standing. It may cause a malfunction.
Contents
Safety Precautions ··········································26
Dimensions ·····················································27
Installation Location ··········································28
Electrical Work ·················································28
Installing the Appliance ······································29
Post-installation Checklist ··································30
(For installer)
Installation
Symptom
Possible cause
■
Pan-frying Mode
(KY-C227E only)
• Preheating takes
too long.
• The actual
temperature is
different from the
set temperature.
IR sensor is not covered.
(P.4)
Stains
●
When preheating
Water, oil or
ingredients
●
If the right cooking zone is used
at the same time, preheating
may take longer.
The temperature on the
bottom of the pan may vary
from the set temperature
depending on the type of
the pan.
Adjust the temperature
as required.
■
Deep-frying Mode
(KY-C227E only)
• Preheating takes
too long.
• The actual
temperature is
different from the
set temperature.
IR sensor is not covered.
(P.4)
Stains
Over 800
g
Unsuitable oil
Hot
Browned
and/or cloudy Sediment
The oil temperature may
vary from the set
temperature or preheating
may take longer depending
on the type, material, and
shape and size of the
bottom of the pot.
Adjust the temperature
as required.