Useful Information
50
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Base no power
or
No link.
Reconnect AC
adaptor.
L
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 35).
Check Phone Line
L
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 11).
Error
L
Recording was too short. Try again.
Failed
L
Phonebook copy failed (page 22). Confirm the other
handset (the receiver) is in standby mode and try
again.
Incomplete
L
The receiver’s phonebook memory is full. Erase the
unwanted phonebook entries from the other handset
(the receiver) and try again.
Memory Full
L
The phonebook memory is full. Erase unwanted
entries (page 21).
L
Message memory is full. Erase unwanted messages
(page 41).
L
The call barred list memory is full. Erase unwanted
entries (page 35).
Use rechargeable
battery.
L
A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 8.
You must first
subscribe to
Caller ID.
L
You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
TG6591E(e).book Page 50 Friday, August 20, 2010 9:29 AM