Panasonic KXF-293C Скачать руководство пользователя страница 135

Страница: 135 / 148

Page 8-3

MACHINE SETTING

8-2

Dot Recognition Feedback

The feedback range of dot feedback is checked and corrected, and the present feedback value is
checked and reset. Besides, the feedback gain is checked and corrected.

• Feedback timer

Reset

The feedback value is reset for each nozzle.

All reset

The feedback value of all nozzles is reset all together.

• Feedback range

The threshold value of feedback range is increased and decreased.

Default

The feedback range is placed to the default setting value. Usually, set the default value.

• Feedback gain

The feedback is carried out at once for the larger value of feedback gain, and the change of
dispensing time gets large.

The value of feedback gain increases and decreases.

Default

The feedback gain is set to the default value (= 1.0).

293C-E-EMA08-A01-02

Содержание KXF-293C





















































































































































Результаты поиска

Содержание KXF-293C

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KXF-293C, Руководство по эксплуатации

Результаты поиска

Содержание KXF-293C

Отзывы:

Бренды по названию

Популярные бренды