Panasonic KXF-193C страница 22 Скачать руководство пользователя

Страница: 22 / 120

Page 22

CLEANING SOLVENT FOR WET CLEANING

Recommended rate of mixed cleaning solvent :

Considering cleaning results, costs, availability, etc., IPA is recommended.
(However, handle IPA with great care because it may catch fire.)

Even if the IPA concentration is diluted to 4% by ethyl alcohol, the successful cleaning result can
still be obtained.

Solvent of 100% ethyl alcohol can be used, though the cleaning result gets worse a little.

Never use acetone.

The use of acetone may damage the solvent tube and the cleaning unit, resulting in the cleaning
solvent leakage.

Never use methanol (methyl alcohol).

The use of methanol breaks the solvent pump and disables its function.

Cleaning solvent may catch fire.

Handle with great care.

Use unused cleaning solvent.

Do not use water or the mixture of water and other cleaning solvent, as the
cleaning solvent.

Rust or change in quality of cleaning solvent may choke piping and damage the machine.

When using cleaning solvent other than ethyl alcohol and IPA, make

contact with us.

If using other cleaning solvent makes trouble, we do not guarantee it.

Wear the mask to avoid an organic odor during work.

IPA contains the substance harmful to the human body.

NOTICE

The following is recommended as the solvent which does not catch fire.
Name : FT - J630

(water solvent)

Manufacturer : Kuraray

Ethyl alcohol

96%

IPA (Isopropyl alcohol)

193C-E-OMA00-A04-00

Содержание KXF-193C

























































































































Результаты поиска

Содержание KXF-193C

Отзывы:

Похожие инструкции для KXF-193C

Бренды по названию

Популярные бренды

Panasonic KXF-193C, Руководство по эксплуатации

Результаты поиска

Содержание KXF-193C

Отзывы:

Похожие инструкции для KXF-193C

Бренды по названию

Популярные бренды