Controlling a PTZ Camera
If a PTZ (pan, tilt, zoom) camera is connected as the main video camera to your unit or the other party’s unit,
you can control the pan (side-to-side movement), the tilt (up-down movement) and the zoom of the camera
during a video conference call.
Note
•
For details about compatible PTZ camera models, contact your dealer.
•
The features that can be used may be limited depending on your video camera model.
(e.g., A video camera with only a zoom feature)
•
When the other party is using a non-Panasonic video conference system, some operations may not
be available, or unintended operations may occur.
1
Press
[CAM Ctrl]
.
•
The site selection dialog box is displayed.
Note
•
After the site selection dialog box is displayed, if
no operations are performed within
approximately 3 seconds, the dialog box will
disappear.
2
Use
[
][
]
to select the site to display and press
[Enter]
.
•
The camera control screen is displayed.
Document Version 2012-03
Operating Manual
59
C
o
n
t
r
o
l
l
i
n
g
a
P
T
Z
C
a
m
e
r
a
Controlling a PTZ Camera
